PartsTable
Technical Data Sheet
Download PDF

7029868-1 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7029868-1: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.250 INCHES NOMINAL IN, material: UNABLE TO DECODE, thickness: 0.060 INCHES NOMINAL IN, overall_width: 3.500 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN, style_designator: SURFACE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-494-0498, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7029868-1
NSN: 5340-01-494-0498
FSC: 5340 — Hardware, Commercial
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
height0.250 INCHES NOMINAL IN
materialUNABLE TO DECODE
thickness0.060 INCHES NOMINAL IN
hole_quantity2
overall_width3.500 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
style_designatorSURFACE
mounting_facilityMOUNTING SLOTS
surface_treatmentUNABLE TO DECODE
end_item_identification5411-01-436-3326
part_name_assigned_by_controlling_agencySTRIKE, END DOOR
NSN5340-01-494-0498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7029868-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SURFACE
•
HEIGHT: 0.250 INCHES NOMINAL IN
•
MOUNTING FACILITY: MOUNTING SLOTS
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSURFACE
OVERALL LENGTH3.250 INCHES NOMINAL IN
OVERALL WIDTH3.500 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
MOUNTING FACILITYMOUNTING SLOTS
SURFACE TREATMENTUNABLE TO DECODE
PART NAME ASSIGNED BY CONTROLLING AGENCYSTRIKE, END DOOR
END ITEM IDENTIFICATION5411-01-436-3326
MATERIALUNABLE TO DECODE
HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
7029868Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7029868-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7029868-1?
7029868-1 is a STRIKE,CATCH.
What parts can replace 7029868-1?
There is 1 known substitute for 7029868-1: 7029868. Substitute compatibility should be verified for your specific system.
What is the NSN for 7029868-1?
7029868-1 is cataloged in the U.S. Government catalog under NSN 5340-01-494-0498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7029868-1