PartsTable
Technical Data Sheet
Download PDF

7027558 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7027558: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.188 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN, first_hole_diameter: 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, pin_overall_diameter: 0.1720 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN, first_end_taper_angle: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-607-2397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7027558
NSN: 5315-00-607-2397
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
first_end_styleCHAMFERED
pin_overall_length2.188 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
first_hole_diameter0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
pin_overall_diameter0.1720 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
hole_arrangement_styleDRILLED THRU CENTER
material_document_and_classificationQQ-W-461 FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-607-2397
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7027558 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-461 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.1720 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.188 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-461 FED SPEC ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.1720 INCHES MINIMUM AND 0.2030 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.188 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
5315006072397Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7027558?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7027558?
7027558 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7027558?
There is 1 known substitute for 7027558: 5315006072397. Substitute compatibility should be verified for your specific system.
What is the NSN for 7027558?
7027558 is cataloged in the U.S. Government catalog under NSN 5315-00-607-2397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7027558

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.