PartsTable
Technical Data Sheet
Download PDF

702716 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

702716: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 7.125 INCHES NOMINAL IN, overall_length: 10.250 INCHES NOMINAL IN, outside_corner_radius: 0.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-033-2718, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
702716
NSN: 5330-01-033-2718
FSC: 5330 — Packing and Gasket Materials
CAGE: 35012 — GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 AND RUBBER SYNTHETIC OVERALL
hole_diameter0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width7.125 INCHES NOMINAL IN
overall_length10.250 INCHES NOMINAL IN
special_features0.625 IN. DISTANCE FROM EDGE OF GASKET TO BOLT HOLE CENTER ALONG WIDTH,0.312 IN. FROM OUTSIDE EDGE TO BOLT HOLE CENTER ALONG LENGTH IN
bolt_hole_quantity8
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
material_document_and_classificationTECKFELT FSCM 07700 MFR REF 2ND MATERIAL RESPONSE OR 20-0617-1414 FSCM 12881 MFR REF 2ND MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.375 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.625 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width6.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-033-2718
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 702716 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: TECKFELT FSCM 07700 MFR REF 2ND MATERIAL RESPONSE OR 20-0617-1414 FSCM 12881 MFR REF 2ND MATERIAL RESPONSE OVERALL
•
BOLT HOLE QUANTITY: 8
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 6.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONTECKFELT FSCM 07700 MFR REF 2ND MATERIAL RESPONSE OR 20-0617-1414 FSCM 12881 MFR REF 2ND MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.250 INCHES NOMINAL IN
OVERALL WIDTH7.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY8
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURES0.625 IN. DISTANCE FROM EDGE OF GASKET TO BOLT HOLE CENTER ALONG WIDTH,0.312 IN. FROM OUTSIDE EDGE TO BOLT HOLE CENTER ALONG LENGTH IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH6.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.625 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 702716?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 702716?
702716 is a GASKET.
What is the NSN for 702716?
702716 is cataloged in the U.S. Government catalog under NSN 5330-01-033-2718. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 702716

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.