PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7026930
7026930 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The CUTTER,MILLING,SHELL END is a the manufacturer industrial component. Key specifications include material: STEEL, face_width: 2.250 INCHES NOMINAL IN, tooth_type: INTEGRAL, outside_diameter: 6.000 INCHES NOMINAL IN, special_features: CAN HAVE 14 TO 16 TEETH, mounting_hole_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3455-00-231-3531, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7026930
NSN: 3455-00-231-3531
FSC: 3455
CAGE: 20528 — ENCO MFG CO (USA)
SPECIFICATIONS
materialSTEEL
face_width2.250 INCHES NOMINAL IN
tooth_typeINTEGRAL
outside_diameter6.000 INCHES NOMINAL IN
special_featuresCAN HAVE 14 TO 16 TEETH
mounting_hole_diameter2.000 INCHES NOMINAL IN
cutting_side_designationRIGHT-HAND
specification/standard_data80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN3455-00-231-3531
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CUTTER,MILLING,SHELL END TITLE COMPONENT PN 7026930 MFR CUTTER,MILLING,SHELL E
KEY FEATURES
•
FACE WIDTH: 2.250 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
MATERIAL: STEEL
•
MOUNTING HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
TOOTH TYPE: INTEGRAL
•
CUTTING SIDE DESIGNATION: RIGHT-HAND
•
OUTSIDE DIAMETER: 6.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FACE WIDTH2.250 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
MATERIALSTEEL
MOUNTING HOLE DIAMETER2.000 INCHES NOMINAL IN
TOOTH TYPEINTEGRAL
CUTTING SIDE DESIGNATIONRIGHT-HAND
SPECIAL FEATURESCAN HAVE 14 TO 16 TEETH
OUTSIDE DIAMETER6.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
W5304-20CAInterchangeable
interchangeable cross-reference
interchangeable
5315PL0847111Interchangeable
interchangeable cross-reference
interchangeable
MS-20392-3C-33Interchangeable
interchangeable cross-reference
interchangeable
NL701RInterchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 19Interchangeable
interchangeable cross-reference
interchangeable
SHMR-225Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7026930?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7026930?
7026930 is a CUTTER,MILLING,SHELL END.
What parts can replace 7026930?
There are 28 known substitutes for 7026930: W5304-20CA, 5315PL0847111, MS-20392-3C-33 and 25 more. Substitute compatibility should be verified for your specific system.
Is 7026930 still available?
7026930 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7026930

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026