PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7026009
7026009 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

GASKET AND PREFORMED PACKING SET. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: ENGINE,GASOLINE, document_source: 19207, end_item_source: 19207, component_quantity: 160, document_identification: DWG. NO.

7026009. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-702-6009, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7026009
NSN: 5330-00-702-6009
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameENGINE,GASOLINE
document_source19207
end_item_source19207
component_quantity160
document_identificationDWG. NO. 7026009
end_item_identification2805-695-6207
component_document_originGOVERNMENT
NSN5330-00-702-6009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7026009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COMPONENT DOCUMENT ORIGIN: GOVERNMENT
•
END ITEM SOURCE: 19207
•
END ITEM NAME: ENGINE,GASOLINE
•
DOCUMENT TYPE: ENGINEERING DRAWING
•
DOCUMENT IDENTIFICATION: DWG. NO. 7026009
•
COMPONENT QUANTITY: 160
•
DOCUMENT SOURCE: 19207
TECHNICAL CHARACTERISTICS (FLIS)
COMPONENT DOCUMENT ORIGINGOVERNMENT
END ITEM SOURCE19207
END ITEM NAMEENGINE,GASOLINE
DOCUMENT TYPEENGINEERING DRAWING
DOCUMENT IDENTIFICATIONDWG. NO. 7026009
COMPONENT QUANTITY160
END ITEM IDENTIFICATION2805-695-6207
DOCUMENT SOURCE19207
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
10689632-5Interchangeable
interchangeable cross-reference
interchangeable
525-044Interchangeable
interchangeable cross-reference
interchangeable
3101-1357Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7026009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7026009?
7026009 is a GASKET AND PREFORMED PACKING SET.
What parts can replace 7026009?
There are 3 known substitutes for 7026009: 10689632-5, 525-044, 3101-1357. Substitute compatibility should be verified for your specific system.
What is the NSN for 7026009?
7026009 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-702-6009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7026009

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026