PartsTable
Technical Data Sheet
Download PDF

7025-03-407-7102 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7025-03-407-7102: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 OVERALL, end_radius: 0.200 INCHES NOMINAL IN, fork_depth: 0.606 INCHES NOMINAL IN, hole_diameter: 0.201 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-171-6798, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7025-03-407-7102
NSN: 5340-01-171-6798
FSC: 5340 — Hardware, Commercial
CAGE: 66841 — PRECI-MANUFACTURING, INCORPORATED (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 OVERALL
end_radius0.200 INCHES NOMINAL IN
fork_depth0.606 INCHES NOMINAL IN
hole_diameter0.201 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
fork_span_width0.250 INCHES NOMINAL IN
special_featuresONE DRILLED HOLE 0.221 IN. DIA. IN HEAD IN
fork_arm_thickness0.094 INCHES NOMINAL IN
metallic_hardness_rating33.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
material_document_and_classificationMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8844,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_rod_connection_end0.700 INCHES NOMINAL IN
NSN5340-01-171-6798
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7025-03-407-7102 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.250 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.094 INCHES NOMINAL IN
•
END RADIUS: 0.200 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8844,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 4340 OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.750 INCHES NOMINAL IN
FORK SPAN WIDTH0.250 INCHES NOMINAL IN
FORK ARM THICKNESS0.094 INCHES NOMINAL IN
END RADIUS0.200 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8844,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.500 INCHES NOMINAL IN
SPECIAL FEATURESONE DRILLED HOLE 0.221 IN. DIA. IN HEAD IN
MATERIALSTEEL COMP 4340 OVERALL
METALLIC HARDNESS RATING33.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
FORK DEPTH0.606 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7025-03-407-7102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7025-03-407-7102?
7025-03-407-7102 is a CLEVIS,ROD END.
What is the NSN for 7025-03-407-7102?
7025-03-407-7102 is cataloged in the U.S. Government catalog under NSN 5340-01-171-6798. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7025-03-407-7102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.