PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7024102P004
7024102P004 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.016 INCHES NOMINAL IN, outside_diameter: 1.375 INCHES NOMINAL IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.025 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-952-1520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7024102P004
NSN: 5310-00-952-1520
FSC: 5310
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.016 INCHES NOMINAL IN
outside_diameter1.375 INCHES NOMINAL IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.025 INCHES NOMINAL IN
NSN5310-00-952-1520
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7024102P004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
•
HOLE DIAMETER: 1.016 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT INTERNAL TEETH
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
HOLE DIAMETER1.016 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
1828HX1Interchangeable
interchangeable cross-reference
interchangeable
NASM90726Interchangeable
interchangeable cross-reference
interchangeable
123605Interchangeable
interchangeable cross-reference
interchangeable
XM-79685-32-2700-I-LInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7024102P004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7024102P004?
7024102P004 is a WASHER,LOCK.
What parts can replace 7024102P004?
There are 4 known substitutes for 7024102P004: 1828HX1, NASM90726, 123605 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7024102P004?
7024102P004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-952-1520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7024102P004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026