PartsTable
Technical Data Sheet
Download PDF

7022460-1 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7022460-1: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: SPECIAL, width: 5.000 INCHES NOMINAL5.000 INCHES NOMINAL IN, length: 13.380 INCHES NOMINAL13.380 INCHES NOMINAL IN, material: STEEL COMP 316, thickness: 0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN, special_features: MOUNTING HOLES ARE COUNTERBORED FOR 0.375 INCHES AND REMAINING HOLE IS THEN 0.394 INCH DIAMETER. IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-521-4159, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7022460-1
NSN: 5340-01-521-4159
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeSPECIAL
width5.000 INCHES NOMINAL5.000 INCHES NOMINAL IN
length13.380 INCHES NOMINAL13.380 INCHES NOMINAL IN
materialSTEEL COMP 316
thickness0.625 INCHES NOMINAL0.625 INCHES NOMINAL IN
special_featuresMOUNTING HOLES ARE COUNTERBORED FOR 0.375 INCHES AND REMAINING HOLE IS THEN 0.394 INCH DIAMETER. IN
mounting_hole_typeUNTHREADED
mounting_hole_diameter1.000 INCHES NOMINAL ALL HOLES IN
mounting_hole_quantity4
end_item_identificationHUL MEC PEN
material_document_and_classificationQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPLATE, RETAINING, BOTTOM, FWD SHOE
NSN5340-01-521-4159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7022460-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
LENGTH: 13.380 INCHES NOMINAL13.380 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 1.000 INCHES NOMINAL ALL HOLES IN
•
SHAPE: SPECIAL
•
WIDTH: 5.000 INCHES NOMINAL5.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
LENGTH13.380 INCHES NOMINAL13.380 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER1.000 INCHES NOMINAL ALL HOLES IN
SHAPESPECIAL
SPECIAL FEATURESMOUNTING HOLES ARE COUNTERBORED FOR 0.375 INCHES AND REMAINING HOLE IS THEN 0.394 INCH DIAMETER. IN
WIDTH5.000 INCHES NOMINAL5.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLATE, RETAINING, BOTTOM, FWD SHOE
END ITEM IDENTIFICATIONHUL MEC PEN
MATERIALSTEEL COMP 316
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
7022460 ITEM NO. 1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7022460-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7022460-1?
7022460-1 is a PLATE,MOUNTING.
What parts can replace 7022460-1?
There is 1 known substitute for 7022460-1: 7022460 ITEM NO. 1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7022460-1?
7022460-1 is cataloged in the U.S. Government catalog under NSN 5340-01-521-4159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7022460-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.