PartsTable
Technical Data Sheet
7021346 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

The 7021346 is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.312 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-727-7768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 7021346
NSN: 6145-01-727-7768
FSC: 6145
CAGE: 0MLM6 — MARINE CORPS SYSTEMS COMMAND PROGRAM MANAGER ASSAULT AMPHIBIOUS VEHICLE
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.312 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.437 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure1000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.562 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
NSN6145-01-727-7768
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 7021346 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
AS5195D0604Interchangeable
interchangeable cross-reference
interchangeable
AS4841/1Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS4842/1Interchangeable
interchangeable cross-reference
interchangeable
74006Interchangeable
interchangeable cross-reference
interchangeable
607-7-64Interchangeable
interchangeable cross-reference
interchangeable
7/64-607Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7021346?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7021346?
7021346 is a 7021346. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7021346?
There are 12 known substitutes for 7021346: AS5195D0604, AS4841/1, SAE-AS4842/1 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7021346?
7021346 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-727-7768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7021346