PartsTable
Technical Data Sheet
Download PDF

70211 — Lindy 70211 power cable Black 0.15 m

✓ Government record, cited
Lindy · MRO · MRO_GENERAL
PRODUCT OVERVIEW

70211: Lindy 70211 power cable Black 0.15 m.

Lindy 70211 power cable Black 0.15 m. Key specifications include end_item_identification: MODEL MOXP207 OR MAXP207 LUBE PURIFIER. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-889-8677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 70211
NSN: 5340-00-889-8677
NIINs: 008898677, 011784663, 012931191, 013515098, 014197083, 014693172, 016561324
FSC: 5340 — Hardware, Commercial
CAGE: F0225 — SOURIAU (FRA)
SPECIFICATIONS
end_item_identificationMODEL MOXP207 OR MAXP207 LUBE PURIFIER
NSN5340-00-889-8677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70211 MFR: Lindy ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 1.700 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.463 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.562 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER1.700 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.463 INCHES NOMINAL IN
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.562 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 7
064792-3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS90376-24RReference document
Same NSN cross-reference
Reference document — Secondary reference
5342PL1384896Reference document
Same NSN cross-reference
Reference document — Informative reference only
M85049/138-50ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
NAS813-24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS85049/138Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 70211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70211?
70211 is a Lindy 70211 power cable Black 0.15 m manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 70211?
There are 7 known substitutes for 70211: 064792-3, MS90376-24R, 5342PL1384896 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70211?
70211 is cataloged in the U.S. Government catalog under NSN 5340-00-889-8677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70211