PartsTable
Technical Data Sheet
Download PDF

7020-70-670-0103 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7020-70-670-0103: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OR STEEL COMP 410 OVERALL, first_end_style: CHAMFERED, second_end_style: CHAMFERED, special_features: MAKE FROM MS16555-663, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-280-6196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7020-70-670-0103
NSN: 5315-01-280-6196
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OR STEEL COMP 410 OVERALL
first_end_styleCHAMFERED
second_end_styleCHAMFERED
special_featuresMAKE FROM MS16555-663
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
first_hole_diameter0.078 INCHES NOMINAL IN
pin_overall_diameter0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
first_end_taper_angle20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
first_end_taper_length0.047 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
second_end_taper_angle4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
NSN5315-01-280-6196
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7020-70-670-0103 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.047 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SS8435 CAGEC 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SECOND END TAPER ANGLE: 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.078 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A493 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.047 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSS8435 CAGEC 78286 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SECOND END TAPER ANGLE4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.078 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A493 ASSN STD 2ND MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7020-70-670-0103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7020-70-670-0103?
7020-70-670-0103 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 7020-70-670-0103?
7020-70-670-0103 is cataloged in the U.S. Government catalog under NSN 5315-01-280-6196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7020-70-670-0103

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.