PartsTable
Technical Data Sheet
Download PDF

7020-92-122-1107 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7020-92-122-1107: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, nut_height: 0.380 INCHES NOMINAL IN, nut_length: 2.250 INCHES NOMINAL IN, plate_width: 1.624 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-206-0105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7020-92-122-1107
NSN: 5310-01-206-0105
FSC: 5310 — Nuts and Washers
CAGE: 78286 — SIKORSKY AIRCRAFT CORPORATION DBA SIKORSKY AIRCRAFT CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
nut_height0.380 INCHES NOMINAL IN
nut_length2.250 INCHES NOMINAL IN
plate_width1.624 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
plate_thickness0.130 INCHES NOMINAL IN
special_featuresNUT EXTENDS BELOW BASE
thread_directionRIGHT-HAND
nominal_thread_size0.750 INCHES IN
nut_mounting_provisionSTRAIGHT HOLES
thread_quantity_per_inch16
NSN5310-01-206-0105
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7020-92-122-1107 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.130 INCHES NOMINAL IN
•
NUT LENGTH: 2.250 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
PLATE WIDTH: 1.624 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.750 INCHES IN
•
NUT HEIGHT: 0.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.130 INCHES NOMINAL IN
NUT LENGTH2.250 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
PLATE WIDTH1.624 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.750 INCHES IN
NUT HEIGHT0.380 INCHES NOMINAL IN
SPECIAL FEATURESNUT EXTENDS BELOW BASE
THREAD CLASS3B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7020-92-122-1107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7020-92-122-1107?
7020-92-122-1107 is a NUT,PLAIN,PLATE.
What is the NSN for 7020-92-122-1107?
7020-92-122-1107 is cataloged in the U.S. Government catalog under NSN 5310-01-206-0105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7020-92-122-1107

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.