PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 702-62
702-62 ✓ Verified by PartsTable
Lindy · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

This adapter cable adapts a USB power supply with large 5 Volt power adapter to almost any other USB Hub, card reader, and other devices that use the small 5V power adapter. Provides max. 0.9A//5V power.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-1145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
702-62
NSN: 5310-00-209-1145
FSC: 5310
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
overall_width1.8 INCHES NOMINAL IN
overall_height4.4 INCHES NOMINAL IN
overall_length2.1 INCHES NOMINAL IN
outside_diameter0.253 INCHES NOMINAL IN
style_designatorRECTANGULAR
surface_treatmentCADMIUM OVERALL
material_thickness0.031 INCHES NOMINAL IN
fsc_application_dataAIRCRAFT HYDRAULIC,VACUUM,DEICING SYSTEMS
end_item_identification4120-01-600-2193
general_characteristics_item_descriptionCYLINDRICAL SHAPED
NSN5310-00-209-1145
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 702-62 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.253 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.253 INCHES NOMINAL IN
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
140179-3Interchangeable
interchangeable cross-reference
interchangeable
140179-5Interchangeable
interchangeable cross-reference
interchangeable
70262Interchangeable
interchangeable cross-reference
interchangeable
N70262Interchangeable
interchangeable cross-reference
interchangeable
1650PL1028891Interchangeable
interchangeable cross-reference
interchangeable
104752Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 702-62?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 702-62?
702-62 is a SOCKET,PLUG-IN ELECTRONIC COMPON manufactured by Lindy.
What parts can replace 702-62?
There are 12 known substitutes for 702-62: 140179-3, 140179-5, 70262 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 702-62?
702-62 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-1145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 702-62

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026