PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 702-132031-204
702-132031-204 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.144 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.250 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-168-6706, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
702-132031-204
NSN: 5340-00-168-6706
FSC: 5340
CAGE: 90073 — CMC ELECTRONICS INC (CAN)
SPECIFICATIONS
diameter0.144 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.250 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.500 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.375 INCHES NOMINAL IN
NSN5340-00-168-6706
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 702-132031-204 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.144 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.375 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.144 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.500 INCHES NOMINAL IN
DIAMETER0.144 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.375 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON BAND
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
X2AUpgraded Successor
successor cross-reference
successor
X2Upgraded Successor
successor cross-reference
successor
37-98Interchangeable
interchangeable cross-reference
interchangeable
05-4004Interchangeable
interchangeable cross-reference
interchangeable
01-002Interchangeable
interchangeable cross-reference
interchangeable
37-960Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 702-132031-204?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 702-132031-204?
702-132031-204 is a CLAMP,LOOP.
What parts can replace 702-132031-204?
There are 10 known substitutes for 702-132031-204: X2A, X2, 37-98 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 702-132031-204?
702-132031-204 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-168-6706. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 702-132031-204

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026