7015840 — STRAINER ELEMENT,SEDIMENT

✓ Government record, cited

— · HOSE FITTING

PRODUCT OVERVIEW

7015840: STRAINER ELEMENT,SEDIMENT.

The STRAINER ELEMENT,SEDIMENT is a the manufacturer industrial component. Key specifications include length: 3.030 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN, material: NICKEL ALLOY, wire_diameter: 0.0065 INCHES NOMINAL IN, style_designator: CYLINDRICAL, end_connection_type: PLAIN ALL ENDS, perforation_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-482-4687, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7015840

NSN: 4730-01-482-4687
NIINs: 014824687, 017189336
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

length	3.030 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
material	NICKEL ALLOY
wire_diameter	0.0065 INCHES NOMINAL IN
style_designator	CYLINDRICAL
end_connection_type	PLAIN ALL ENDS
perforation_diameter	0.250 INCHES NOMINAL IN
filtering_media_design	MESH
end_item_identification	NSSN CLASS SUB - WASP CLASS LHD
element_outside_diameter	0.750 INCHES NOMINAL IN
NSN	4730-01-482-4687

COMPONENT DIAGRAM

KEY FEATURES

•

FILTERING MEDIA DESIGN: MESH

•

LENGTH: 3.030 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN

•

END CONNECTION TYPE: PLAIN ALL ENDS

•

STYLE DESIGNATOR: CYLINDRICAL

•

ELEMENT OUTSIDE DIAMETER: 0.750 INCHES NOMINAL IN

•

MATERIAL: NICKEL ALLOY

TECHNICAL CHARACTERISTICS

FILTERING MEDIA DESIGN	MESH
LENGTH	3.030 INCHES MINIMUM AND 3.050 INCHES MAXIMUM IN
END CONNECTION TYPE	PLAIN ALL ENDS
STYLE DESIGNATOR	CYLINDRICAL
ELEMENT OUTSIDE DIAMETER	0.750 INCHES NOMINAL IN
SPECIAL FEATURES	NHAMANIFOLD, ACCUMULATOR HIGH PRESSURE AIR CHARGING ISOLATION; SCREEN STRAINER IS SQUARE WIRE MESH SCREEN 70 X 70 X 0.0065; OUTER STRAINER ELEMENT TUBE IS 3.03-3.05 IN. LONG X 0.750 IN. OD WITH 18 0.250 IN. DIA PERFORATIONS; INNER STRAINER ELEMENT TUBE IS 3.03-3.05 IN. LONG X 0.562 IN. OD WITH 18 0.250 IN. DIA PERFORATIONS; MESH GOES IN BETWEEN THE TWO TUBES. IN
END ITEM IDENTIFICATION	NSSN CLASS SUB - WASP CLASS LHD
MATERIAL	NICKEL ALLOY
PERFORATION DIAMETER	0.250 INCHES NOMINAL IN
WIRE DIAMETER	0.0065 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 4

556-7015840-C10Reference document

Same NSN cross-reference

Reference document — Secondary reference

H791-6001Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

556-7015840-B10Reference document

Same NSN cross-reference

Reference document — Secondary reference

556-7015840-A10Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy 7015840?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7015840?

7015840 is a STRAINER ELEMENT,SEDIMENT.

What parts can replace 7015840?

There are 4 known substitutes for 7015840: 556-7015840-C10, H791-6001, 556-7015840-B10 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 7015840?

7015840 is cataloged in the U.S. Government catalog under NSN 4730-01-482-4687. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7015840 — STRAINER ELEMENT,SEDIMENT

Request a Quote — 7015840