PartsTable
Technical Data Sheet
Download PDF

7014M86G03 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7014M86G03: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL CUSHIONING, mounting_pad: NOT INCLUDED, overall_width: 0.880 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-514-1705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7014M86G03
NSN: 5340-00-514-1705
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL CUSHIONING
mounting_padNOT INCLUDED
overall_width0.880 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
style_designatorCURVED ARCH
material_thickness0.093 INCHES NOMINAL IN
mounting_hole_size0.2812 INCHES NOMINAL IN
inside_diameter/arch_length1.244 INCHES NOMINAL IN
distance_between_mounting_hole_centers2.375 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.622 INCHES NOMINAL IN
NSN5340-00-514-1705
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7014M86G03 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.2812 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 2.375 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
•
CUSHION: INCLUDED
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.2812 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS2.375 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
OVERALL LENGTH3.000 INCHES NOMINAL IN
OVERALL WIDTH0.880 INCHES NOMINAL IN
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
CUSHIONINCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.622 INCHES NOMINAL IN
MATERIALSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
332C797G1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7014M86G03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7014M86G03?
7014M86G03 is a STRAP,RETAINING.
What parts can replace 7014M86G03?
There is 1 known substitute for 7014M86G03: 332C797G1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7014M86G03?
7014M86G03 is cataloged in the U.S. Government catalog under NSN 5340-00-514-1705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7014M86G03