PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7014686
7014686 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 5.125 INCHES NOMINAL IN, length: 5.500 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.312 INCHES NOMINAL IN, body_thickness: 0.042 INCHES NOMINAL IN, flange_thickness: 0.042 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-701-4686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7014686
NSN: 5340-00-701-4686
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width5.125 INCHES NOMINAL IN
length5.500 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.312 INCHES NOMINAL IN
body_thickness0.042 INCHES NOMINAL IN
flange_thickness0.042 INCHES NOMINAL IN
special_featuresTWO BREATHER HOLES,ONE LUBRICATION HOLE
securing_device_typeSPECIAL
first_recess_inside_height1.250 INCHES NOMINAL IN
mounting_opening_shape_styleUNTHREADED HOLE
NSN5340-00-701-4686
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7014686 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.042 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: SPECIAL
•
BODY THICKNESS: 0.042 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
FIRST RECESS INSIDE HEIGHT: 1.250 INCHES NOMINAL IN
•
WIDTH: 5.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.312 INCHES NOMINAL IN
FLANGE THICKNESS0.042 INCHES NOMINAL IN
SECURING DEVICE TYPESPECIAL
BODY THICKNESS0.042 INCHES NOMINAL IN
MATERIALSTEEL
FIRST RECESS INSIDE HEIGHT1.250 INCHES NOMINAL IN
WIDTH5.125 INCHES NOMINAL IN
SPECIAL FEATURESTWO BREATHER HOLES,ONE LUBRICATION HOLE
LENGTH5.500 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
00781568104989Interchangeable
interchangeable cross-reference
interchangeable
E934Interchangeable
interchangeable cross-reference
interchangeable
PIDODP25Interchangeable
interchangeable cross-reference
interchangeable
364Interchangeable
interchangeable cross-reference
interchangeable
J364Interchangeable
interchangeable cross-reference
interchangeable
J364AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7014686?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7014686?
7014686 is a COVER,ACCESS.
What parts can replace 7014686?
There are 6 known substitutes for 7014686: 00781568104989, E934, PIDODP25 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7014686?
7014686 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-701-4686. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7014686

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026