PartsTable
Technical Data Sheet
Download PDF

7013MS160-5708 — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7013MS160-5708: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.103 INCHES NOMINAL IN, joint_type: SCARF-BEARING SURFACE BOTTOM RING, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, inside_diameter: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, outside_diameter: 0.550 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE/RECTANGULAR BOTTOM RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-395-5298, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7013MS160-5708
NSN: 5330-00-395-5298
NIINs: 003955298, 010889343
FSC: 5330 — Packing and Gasket Materials
CAGE: 5F573 — GREENE TWEED & CO INC (USA)
SPECIFICATIONS
height0.103 INCHES NOMINAL IN
joint_typeSCARF-BEARING SURFACE BOTTOM RING
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
inside_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
outside_diameter0.550 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR BOTTOM RING
NSN5330-00-395-5298
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7013MS160-5708 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 4
S38421-013BAKISSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SP402-013Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST7M254-013E2Reference document
Same NSN cross-reference
Reference document — Secondary reference
082-59990-013MSReference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7013MS160-5708?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7013MS160-5708?
7013MS160-5708 is a PACKING ASSEMBLY.
What parts can replace 7013MS160-5708?
There are 4 known substitutes for 7013MS160-5708: S38421-013BAKIS, SP402-013, ST7M254-013E2 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7013MS160-5708?
7013MS160-5708 is cataloged in the U.S. Government catalog under NSN 5330-00-395-5298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7013MS160-5708

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.