PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 701324
701324 ✓ Verified by PartsTable
Zapf · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The INSULATOR,WASHER is a Zapf industrial component. Key specifications include material: STEEL OVERALL, head_style: PAN NO. 2, head_height: 0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN, hole_diameter: 0.563 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-3610, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701324
NSN: 5330-00-110-3610
FSC: 5330
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_stylePAN NO. 2
head_height0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hole_diameter0.563 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width31.750 INCHES NOMINAL IN
thread_length0.438 INCHES NOMINAL IN
overall_height0.048 INCHES NOMINAL IN
overall_length39.250 INCHES NOMINAL IN
fastener_length0.500 INCHES NOMINAL IN
inside_diameter0.259 INCHES NOMINAL IN
NSN5330-00-110-3610
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 701324 MFR: Zapf ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.563 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 36
•
MATERIAL: ASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1252-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
OVERALL LENGTH39.250 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.563 INCHES MINIMUM AND 0.937 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH31.750 INCHES NOMINAL IN
BOLT HOLE QUANTITY36
MATERIALASBESTOS AND RUBBER CHLOROPRENE CLASS CR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1252-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
701324Interchangeable
interchangeable cross-reference
interchangeable
112047Interchangeable
interchangeable cross-reference
interchangeable
M5992Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701324?
701324 is a INSULATOR,WASHER manufactured by Zapf.
What parts can replace 701324?
There are 3 known substitutes for 701324: 701324, 112047, M5992. Substitute compatibility should be verified for your specific system.
What is the NSN for 701324?
701324 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-110-3610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701324

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026