PartsTable / COMPONENT / 701312 NON-ASBESTOS
701312 NON-ASBESTOS
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 23.563 INCHES NOMINAL IN, overall_length: 23.875 INCHES NOMINAL IN, special_features: MATERIAL NON-ASBESTOS, bolt_hole_quantity: 20, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-380-0802, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
701312 NON-ASBESTOS
NSN: 5330-01-380-0802 FSC: 5330 CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
hole_diameter 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN overall_width 23.563 INCHES NOMINAL IN overall_length 23.875 INCHES NOMINAL IN special_features MATERIAL NON-ASBESTOS bolt_hole_quantity 20 cross-sectional_thickness 0.031 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION environmental_attribute_code ASBESTOS ALTERNATIVE PRODUCTS NSN 5330-01-380-0802
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 701312 NON-ASBESTOS
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
• HOLE DIAMETER: 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
• ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURES MATERIAL NON-ASBESTOS OVERALL LENGTH 23.875 INCHES NOMINAL IN OVERALL WIDTH 23.563 INCHES NOMINAL IN CROSS-SECTIONAL THICKNESS 0.031 INCHES NOMINAL IN HOLE DIAMETER 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN BOLT HOLE QUANTITY 20 ENVIRONMENTAL ATTRIBUTE CODE ASBESTOS ALTERNATIVE PRODUCTS CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
701312 Interchangeable interchangeable cross-reference
interchangeable
113081 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 701312 NON-ASBESTOS?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701312 NON-ASBESTOS?
701312 NON-ASBESTOS is a GASKET.
What parts can replace 701312 NON-ASBESTOS?
There are 2 known substitutes for 701312 NON-ASBESTOS: 701312, 113081. Substitute compatibility should be verified for your specific system.
Is 701312 NON-ASBESTOS still available?
701312 NON-ASBESTOS is currently cancelled.
Request a Quote — 701312 NON-ASBESTOS