PartsTable
Technical Data Sheet
Download PDF

701170 — GEAR AND HUB

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

701170: GEAR AND HUB.

The GEAR AND HUB is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, surface_finish: 24.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, pin_overall_length: 1.125 INCHES NOMINAL IN, pin_overall_diameter: 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-102-2965, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701170
NSN: 5315-00-102-2965
NIINs: 001022965, 003822888
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
surface_finish24.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
pin_overall_length1.125 INCHES NOMINAL IN
pin_overall_diameter0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-102-2965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 701170 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 24.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.125 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH24.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.125 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 303 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 701170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701170?
701170 is a GEAR AND HUB.
What is the NSN for 701170?
701170 is cataloged in the U.S. Government catalog under NSN 5315-00-102-2965. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701170

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.