PartsTable
Technical Data Sheet
Download PDF

701086 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

701086: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 BAND, slot_width: 0.406 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: OBLONG. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-001-9814, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701086
NSN: 5305-00-001-9814
NIINs: 000019814, 001564126, 002554384
FSC: 5305 — Screws
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL COMP 304 BAND
slot_width0.406 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeOBLONG
material_thickness0.109 INCHES NOMINAL IN
loop_inside_diameter3.000 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end3.562 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.562 INCHES NOMINAL IN
NSN5305-00-001-9814
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 701086 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: ZINC
•
FASTENER LENGTH: 0.375 INCHES MINIMUM IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTZINC
FASTENER LENGTH0.375 INCHES MINIMUM IN
THREAD LENGTH0.313 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 1
173-226Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 701086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701086?
701086 is a BEARING,BALL,ANNULAR.
What parts can replace 701086?
There is 1 known substitute for 701086: 173-226. Substitute compatibility should be verified for your specific system.
What is the NSN for 701086?
701086 is cataloged in the U.S. Government catalog under NSN 5305-00-001-9814. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.