PartsTable
Technical Data Sheet
Download PDF

7010514 — MANDREL,TUBE BENDING

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

7010514: MANDREL,TUBE BENDING.

The MANDREL,TUBE BENDING is a the manufacturer industrial component. Key specifications include cooling_method: AIR TO AIR COOLED, operation_method: POWERED, prime_mover_type: HYDRAULIC MOTOR, unable_to_decode: UNABLE TO DECODE, operating_pressure: 150000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS, drum_surface_design: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 3460-01-075-2677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7010514
NSN: 3460-01-075-2677
NIINs: 010752677, 015207444
FSC: 3460 — Machine Tool Accessories
CAGE: 74QK6 — AJAX TOCCO MAGNETHERMIC CORPORATION DBA PINES ENGINEERING DIV PINES ENGINEERING (USA)
SPECIFICATIONS
cooling_methodAIR TO AIR COOLED
operation_methodPOWERED
prime_mover_typeHYDRAULIC MOTOR
unable_to_decodeUNABLE TO DECODE
operating_pressure150000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS
drum_surface_designPLAIN
drum_flange_diameter16.500 INCHES NOMINAL FIRST DRUM IN
prime_mover_quantity1
end_item_identification2350-01-080-9088
drum_diameter_and_location7.500 INCHES NOMINAL FIRST DRUM IN
NSN3460-01-075-2677
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MANDREL,TUBE BENDING TITLE COMPONENT PN 7010514 MFR MANDREL,TUBE BENDING
KEY FEATURES
•
DESIGN TYPE: FLEXIBLE BALL
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
TUBING WALL THICKNESS FOR WHICH DESIGNED: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
BALL QUANTITY: 1
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
DESIGN TYPEFLEXIBLE BALL
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TUBING WALL THICKNESS FOR WHICH DESIGNED0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
BALL QUANTITY1
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 2
C3912-4-2Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
11-2-4-20-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7010514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7010514?
7010514 is a MANDREL,TUBE BENDING.
What parts can replace 7010514?
There are 2 known substitutes for 7010514: C3912-4-2, 11-2-4-20-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7010514?
7010514 is cataloged in the U.S. Government catalog under NSN 3460-01-075-2677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7010514

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.