PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 701000-248
701000-248 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 0.800 INCHES NOMINAL IN, aperture_width: 0.550 INCHES NOMINAL IN, overall_length: 3.012 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL, surface_treatment: OXIDE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-8514, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701000-248
NSN: 5330-00-086-8514
FSC: 5330
CAGE: 78957 — COMDIAL BUSINESS COMMUNICATIONS CORP REPAIR DEPT (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width0.800 INCHES NOMINAL IN
aperture_width0.550 INCHES NOMINAL IN
overall_length3.012 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
surface_treatmentOXIDE OVERALL
inside_corner_radius0.187 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-086-8514
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 701000-248 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
INSIDE CORNER RADIUS: 0.187 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL OVERALL
•
APERTURE WIDTH: 0.550 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH3.012 INCHES NOMINAL IN
OVERALL WIDTH0.800 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
INSIDE CORNER RADIUS0.187 INCHES NOMINAL IN
SURFACE TREATMENTOXIDE OVERALL
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL OVERALL
APERTURE WIDTH0.550 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
K-500-CH-1349Interchangeable
interchangeable cross-reference
interchangeable
MS14314-3XInterchangeable
interchangeable cross-reference
interchangeable
W6506BInterchangeable
interchangeable cross-reference
interchangeable
1-093Interchangeable
interchangeable cross-reference
interchangeable
B1093Interchangeable
interchangeable cross-reference
interchangeable
A1093Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701000-248?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701000-248?
701000-248 is a GASKET.
What parts can replace 701000-248?
There are 16 known substitutes for 701000-248: K-500-CH-1349, MS14314-3X, W6506B and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 701000-248?
701000-248 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-086-8514. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701000-248

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026