PartsTable
Technical Data Sheet
Download PDF

701-6938568 PC 67 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

701-6938568 PC 67: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include stud_length: 1.7500 INCHES NOMINAL IN, thread_class: 2A A, stud_diameter: 1.0000 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM IN, thread_length: 0.8750 INCHES NOMINAL IN, overall_length: 1.8700 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN, outer_ring_width: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-463-5895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701-6938568 PC 67
NSN: 3110-01-463-5895
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
stud_length1.7500 INCHES NOMINAL IN
thread_class2A A
seal_quantity2
stud_diameter1.0000 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM IN
thread_length0.8750 INCHES NOMINAL IN
overall_length1.8700 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
outer_ring_width0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
special_featuresHEX HOLE ON FACE STUD: STUD DRILLED AND TAPPED FOR RELUBRICATION
style_designatorFAN AND WATER PUMP BALL TYPE
thread_directionRIGHT-HAND
bearing_seal_typeCONTACT
overall_outside_diameter1.8750 INCHES NOMINAL IN
NSN3110-01-463-5895
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 701-6938568 PC 67 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
OUTER RING WIDTH: 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.8750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FAN AND WATER PUMP BALL TYPE
•
OVERALL OUTSIDE DIAMETER: 1.8750 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
STUD LENGTH: 1.7500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
OUTER RING WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
THREAD LENGTH0.8750 INCHES NOMINAL IN
STYLE DESIGNATORFAN AND WATER PUMP BALL TYPE
OVERALL LENGTH1.8700 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.8750 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
STUD LENGTH1.7500 INCHES NOMINAL IN
SPECIAL FEATURESHEX HOLE ON FACE STUD: STUD DRILLED AND TAPPED FOR RELUBRICATION
SEAL QUANTITY2
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
701-6938568 ITEM 67Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 701-6938568 PC 67?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701-6938568 PC 67?
701-6938568 PC 67 is a CAM FOLLOWER,NEEDLE BEARING.
What parts can replace 701-6938568 PC 67?
There is 1 known substitute for 701-6938568 PC 67: 701-6938568 ITEM 67. Substitute compatibility should be verified for your specific system.
What is the NSN for 701-6938568 PC 67?
701-6938568 PC 67 is cataloged in the U.S. Government catalog under NSN 3110-01-463-5895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701-6938568 PC 67