PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 701-5008307 P/N 12
701-5008307 P/N 12 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 701-5008307 P/N 12 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-449-9832, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701-5008307 P/N 12
NSN: 5310-01-449-9832
FSC: 5310
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
Part Number701-5008307 P/N 12
NSN5310-01-449-9832
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 701-5008307 P/N 12 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 1.010 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
SURFACE TREATMENT: CADMIUM OVERALL
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD QUANTITY PER INCH: 8
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT1.010 INCHES MINIMUM AND 1.141 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
SURFACE TREATMENTCADMIUM OVERALL
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD QUANTITY PER INCH8
NOMINAL THREAD SIZE1.000 INCHES IN
MATERIALSTEEL OVERALL
WIDTH ACROSS FLATS1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MS17829-16C(MOD )Interchangeable
interchangeable cross-reference
interchangeable
122-6776881 PC 4Interchangeable
interchangeable cross-reference
interchangeable
122-6776003 PC 16Interchangeable
interchangeable cross-reference
interchangeable
1-8UNC-2BInterchangeable
interchangeable cross-reference
interchangeable
1.00008UNC2BT1G5NSBAMInterchangeable
interchangeable cross-reference
interchangeable
MIL-S-1222G TY1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701-5008307 P/N 12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701-5008307 P/N 12?
701-5008307 P/N 12 is a 701-5008307 P/N 12.
What parts can replace 701-5008307 P/N 12?
There are 8 known substitutes for 701-5008307 P/N 12: MS17829-16C(MOD ), 122-6776881 PC 4, 122-6776003 PC 16 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 701-5008307 P/N 12?
701-5008307 P/N 12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-449-9832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701-5008307 P/N 12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026