PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 701-4457982 SH 1 PC 5
701-4457982 SH 1 PC 5 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN, thread_length: 0.542 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1194, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
701-4457982 SH 1 PC 5
NSN: 5305-00-010-1194
FSC: 5305
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
thread_length0.542 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.216 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
NSN5305-00-010-1194
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 701-4457982 SH 1 PC 5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
SCREW MATERIAL: COPPER ALLOY
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
THREAD CLASS: 2A A
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
SCREW MATERIALCOPPER ALLOY
NOMINAL THREAD DIAMETER0.216 INCHES IN
THREAD CLASS2A A
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
101194Interchangeable
interchangeable cross-reference
interchangeable
1-ABC-03800-AGA-004Interchangeable
interchangeable cross-reference
interchangeable
25W1001TH02BXUC 200#-AGQInterchangeable
interchangeable cross-reference
interchangeable
245507Interchangeable
interchangeable cross-reference
interchangeable
289281Interchangeable
interchangeable cross-reference
interchangeable
96952Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701-4457982 SH 1 PC 5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701-4457982 SH 1 PC 5?
701-4457982 SH 1 PC 5 is a SCREW,MACHINE.
What parts can replace 701-4457982 SH 1 PC 5?
There are 7 known substitutes for 701-4457982 SH 1 PC 5: 101194, 1-ABC-03800-AGA-004, 25W1001TH02BXUC 200#-AGQ and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 701-4457982 SH 1 PC 5?
701-4457982 SH 1 PC 5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-1194. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701-4457982 SH 1 PC 5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026