PartsTable
Technical Data Sheet
PartsTable / MRO / 701-103
701-103 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 0.8125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 701-103
NSN: 3110-00-156-5428
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
body_length0.250 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width0.8125 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
load_directionANGULAR
surface_finishGROUND
document_source3T821
shield_quantity1
NSN3110-00-156-5428
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 701-103 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODPRESSED
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
SHIELD QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
783H1Interchangeable
interchangeable cross-reference
interchangeable
S16001Interchangeable
interchangeable cross-reference
interchangeable
C6127PT46Interchangeable
interchangeable cross-reference
interchangeable
7605Interchangeable
interchangeable cross-reference
interchangeable
45DInterchangeable
interchangeable cross-reference
interchangeable
D15-739YPC512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 701-103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 701-103?
701-103 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 701-103?
There are 20 known substitutes for 701-103: 783H1, S16001, C6127PT46 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 701-103?
701-103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-5428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 701-103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026