PartsTable
Technical Data Sheet
Download PDF

7009937P2 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7009937P2: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.281 INCHES NOMINAL IN, nut_length: 0.899 INCHES NOMINAL IN, plate_width: 0.578 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-992-8725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7009937P2
NSN: 5310-00-992-8725
FSC: 5310 — Nuts and Washers
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.281 INCHES NOMINAL IN
nut_length0.899 INCHES NOMINAL IN
plate_width0.578 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
plate_thickness0.032 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.190 INCHES IN
mounting_hole_diameter0.125 INCHES NOMINAL IN
NSN5310-00-992-8725
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7009937P2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.032 INCHES NOMINAL IN
•
NUT LENGTH: 0.899 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
PLATE WIDTH: 0.578 INCHES NOMINAL IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.281 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.032 INCHES NOMINAL IN
NUT LENGTH0.899 INCHES NOMINAL IN
THREAD SERIESUNF
PLATE WIDTH0.578 INCHES NOMINAL IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
DISTANCE FROM BASE TO CENTER OF APERTURE0.281 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.125 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7009937P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7009937P2?
7009937P2 is a NUT,PLAIN,PLATE.
What is the NSN for 7009937P2?
7009937P2 is cataloged in the U.S. Government catalog under NSN 5310-00-992-8725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7009937P2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.