PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 700988
700988 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, contact_angle: 15.0 DEGREES NOMINAL, load_direction: ANGULAR, overall_height: 0.6250 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-6107, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700988
NSN: 3110-00-157-6107
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
contact_angle15.0 DEGREES NOMINAL
load_directionANGULAR
overall_height0.6250 INCHES NOMINAL IN
surface_finishGROUND
inner_ring_width0.5940 INCHES NOMINAL IN
outer_ring_width0.4500 INCHES NOMINAL IN
special_featuresBANDED OD,ONE FACE OF OUTER RING FORMS LIP WHICH EXTENDS DOWN TO MEET SHOULDER ON OD OF INNER RING
style_designatorCLUTCH RELEASE
overall_outside_diameter2.8125 INCHES NOMINAL IN
NSN3110-00-157-6107
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700988 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: CLUTCH RELEASE
•
CONTACT ANGLE: 15.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
STYLE DESIGNATORCLUTCH RELEASE
MATERIALSTEEL OUTER RING
CONTACT ANGLE15.0 DEGREES NOMINAL
SPECIAL FEATURESBANDED OD,ONE FACE OF OUTER RING FORMS LIP WHICH EXTENDS DOWN TO MEET SHOULDER ON OD OF INNER RING
MATERIALSTEEL INNER RING
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
BORE DIAMETER1.4995 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER2.8125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
101125Interchangeable
interchangeable cross-reference
interchangeable
CT24AInterchangeable
interchangeable cross-reference
interchangeable
CT24CInterchangeable
interchangeable cross-reference
interchangeable
5-131-04-024-00Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
0921206-9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700988?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700988?
700988 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 700988?
There are 26 known substitutes for 700988: 101125, CT24A, CT24C and 23 more. Substitute compatibility should be verified for your specific system.
Is 700988 still available?
700988 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700988

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026