PartsTable
Technical Data Sheet
Download PDF

7009486-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7009486-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL, shank_length: 0.250 INCHES NOMINAL IN, overall_length: 2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN, shank_diameter: 0.873 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN, undercut_width: 0.250 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-486-2026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7009486-1
NSN: 5315-01-486-2026
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY K-500 OR NICKEL ALLOY 502 OVERALL
shank_length0.250 INCHES NOMINAL IN
overall_length2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
shank_diameter0.873 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
undercut_width0.250 INCHES NOMINAL IN
first_end_styleCHAMFERED
style_designatorUNDERCUT
shoulder_diameter0.873 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
undercut_diameter0.620 INCHES NOMINAL IN
first_end_locationLONG END
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.060 INCHES NOMINAL IN
NSN5315-01-486-2026
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7009486-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.873 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.250 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.060 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.620 INCHES NOMINAL IN
•
FIRST END LOCATION: LONG END
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: UNDERCUT
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.873 INCHES MINIMUM AND 0.876 INCHES MAXIMUM IN
UNDERCUT WIDTH0.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.060 INCHES NOMINAL IN
UNDERCUT DIAMETER0.620 INCHES NOMINAL IN
FIRST END LOCATIONLONG END
FIRST END STYLECHAMFERED
SHANK LENGTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286, CL A OR B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.730 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
6853526 ITEM NO. 14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7009486-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7009486-1?
7009486-1 is a PIN,SHOULDER,HEADLESS.
What parts can replace 7009486-1?
There is 1 known substitute for 7009486-1: 6853526 ITEM NO. 14. Substitute compatibility should be verified for your specific system.
What is the NSN for 7009486-1?
7009486-1 is cataloged in the U.S. Government catalog under NSN 5315-01-486-2026. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7009486-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.