PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7008443
7008443 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,CAP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OVERALL, nut_style: CAP, nut_height: 1.190 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-328-7295, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7008443
NSN: 5310-00-328-7295
FSC: 5310
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OVERALL
nut_styleCAP
nut_height1.190 INCHES NOMINAL IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.750 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeFLAT
drilled_hole_diameter0.312 INCHES NOMINAL IN
hole_type_and_quantity1 DRILLED
hole_configuration_styleCONFIGURATION C
NSN5310-00-328-7295
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7008443 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 1.190 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 24
•
BEARING SURFACE TYPE: FLAT
•
HOLE CONFIGURATION STYLE: CONFIGURATION C
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT1.190 INCHES NOMINAL IN
THREAD CLASS2B
THREAD QUANTITY PER INCH24
BEARING SURFACE TYPEFLAT
HOLE CONFIGURATION STYLECONFIGURATION C
NOMINAL THREAD SIZE0.312 INCHES IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
DRILLED HOLE DIAMETER0.312 INCHES NOMINAL IN
NUT STYLECAP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
99015Interchangeable
interchangeable cross-reference
interchangeable
51279Interchangeable
interchangeable cross-reference
interchangeable
99016Interchangeable
interchangeable cross-reference
interchangeable
CH14Interchangeable
interchangeable cross-reference
interchangeable
C5RA6744AInterchangeable
interchangeable cross-reference
interchangeable
PM-268BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7008443?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7008443?
7008443 is a NUT,PLAIN,CAP.
What parts can replace 7008443?
There are 6 known substitutes for 7008443: 99015, 51279, 99016 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7008443?
7008443 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-328-7295. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7008443

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026