PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 700774PC1
700774PC1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN, thread_length: 0.250 INCHES NOMINAL IN, fastener_length: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-272-4595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700774PC1
NSN: 5305-00-272-4595
FSC: 5305
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
thread_length0.250 INCHES NOMINAL IN
fastener_length0.250 INCHES NOMINAL IN
hardness_rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentCHROMATE ZINC OVERALL
width_across_flats0.078 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-00-272-4595
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 700774PC1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
•
THREAD LENGTH: 0.250 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
SURFACE TREATMENT: CHROMATE ZINC OVERALL
•
HEAD DIAMETER: 0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA4 TYPE
THREAD LENGTH0.250 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SURFACE TREATMENTCHROMATE ZINC OVERALL
HEAD DIAMETER0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN
HEAD STYLEFLAT COUNTERSUNK
THREAD QUANTITY PER INCH32
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
43-S-44595-3270Interchangeable
interchangeable cross-reference
interchangeable
265005PC9Interchangeable
interchangeable cross-reference
interchangeable
FFS86TYPE4Interchangeable
interchangeable cross-reference
interchangeable
14397Interchangeable
interchangeable cross-reference
interchangeable
H643-7101-11Interchangeable
interchangeable cross-reference
interchangeable
60-16-6753AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700774PC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700774PC1?
700774PC1 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 700774PC1?
There are 7 known substitutes for 700774PC1: 43-S-44595-3270, 265005PC9, FFS86TYPE4 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700774PC1?
700774PC1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-272-4595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700774PC1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026