PartsTable
Technical Data Sheet
Download PDF

7007148 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7007148: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, hole_depth: 0.560 INCHES NOMINAL IN, overall_height: 1.094 INCHES NOMINAL IN, special_features: ALIGNMENT POST, end_item_identification: JP5 FUELING, outside/top_flange_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-424-6523, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7007148
NSN: 5340-01-424-6523
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
hole_depth0.560 INCHES NOMINAL IN
overall_height1.094 INCHES NOMINAL IN
special_featuresALIGNMENT POST
end_item_identificationJP5 FUELING
outside/top_flange_diameter1.500 INCHES NOMINAL IN
material_document_and_classificationL-P-416 6/6 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-424-6523
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7007148 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 1.500 INCHES NOMINAL IN
•
HOLE DEPTH: 0.560 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-416 6/6 FED SPEC SINGLE MATERIAL RESPONSE
•
COLOR: BLACK
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.094 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER1.500 INCHES NOMINAL IN
HOLE DEPTH0.560 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-416 6/6 FED SPEC SINGLE MATERIAL RESPONSE
COLORBLACK
SPECIAL FEATURESALIGNMENT POST
END ITEM IDENTIFICATIONJP5 FUELING
MATERIALPLASTIC POLYAMIDE NYLON
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7007148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7007148?
7007148 is a BUMPER.
What is the NSN for 7007148?
7007148 is cataloged in the U.S. Government catalog under NSN 5340-01-424-6523. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7007148

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.