PartsTable
Technical Data Sheet
Download PDF

700701PC4 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

700701PC4: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, temp_rating: -20.0 FAHRENHEIT AND 130.0 FAHRENHEIT DEGF, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.500 INCHES NOMINAL IN, aperture_width: 7.750 INCHES NOMINAL IN, overall_length: 31.880 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-035-7607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700701PC4
NSN: 5330-01-035-7607
FSC: 5330 — Packing and Gasket Materials
CAGE: 58475 — L-3 COMMUNICATIONS WESTWOOD CORPORATION DBA NMP DIVISION DIV L3 WESTWOOD CORPORATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
temp_rating-20.0 FAHRENHEIT AND 130.0 FAHRENHEIT DEGF
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.500 INCHES NOMINAL IN
aperture_width7.750 INCHES NOMINAL IN
overall_length31.880 INCHES NOMINAL IN
aperture_length29.880 INCHES NOMINAL IN
hardness_rating40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
bolt_hole_quantity18
inside_corner_radius0.130 INCHES NOMINAL IN
cross-sectional_thickness0.130 INCHES NOMINAL IN
NSN5330-01-035-7607
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 700701PC4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 130.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.130 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.130 INCHES NOMINAL IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT AND 130.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.130 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.130 INCHES NOMINAL IN
HARDNESS RATING40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH31.880 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH9.500 INCHES NOMINAL IN
APERTURE WIDTH7.750 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
701073-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 700701PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700701PC4?
700701PC4 is a GASKET.
What parts can replace 700701PC4?
There is 1 known substitute for 700701PC4: 701073-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 700701PC4?
700701PC4 is cataloged in the U.S. Government catalog under NSN 5330-01-035-7607. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700701PC4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.