PartsTable
Technical Data Sheet
PartsTable / MRO / 700654
700654 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, body_length: 0.375 INCHES NOMINAL IN, body_diameter: 0.125 INCHES NOMINAL IN, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 1.100 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 700654
NSN: 3110-00-155-6672
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
body_length0.375 INCHES NOMINAL IN
body_diameter0.125 INCHES NOMINAL IN
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width1.100 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCASED
load_directionRADIAL
overall_height0.655 INCHES NOMINAL IN
overall_length2.375 INCHES NOMINAL IN
surface_finishGROUND
NSN3110-00-155-6672
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700654 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SHIELD QUANTITY: 2
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OUTER RING
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY2
SURFACE FINISHGROUND
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
1607XInterchangeable
interchangeable cross-reference
interchangeable
AA59589-207JABTInterchangeable
interchangeable cross-reference
interchangeable
A-A-59589Interchangeable
interchangeable cross-reference
interchangeable
543426Interchangeable
interchangeable cross-reference
interchangeable
1314X1Interchangeable
interchangeable cross-reference
interchangeable
315ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700654?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700654?
700654 is a OSCILLATOR,CRYSTAL CONTROLLED. It is classified as a MRO (MRO_GENERAL).
What parts can replace 700654?
There are 35 known substitutes for 700654: 1607X, AA59589-207JABT, A-A-59589 and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700654?
700654 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700654

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026