PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70065-3
70065-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include material: TITANIUM OVERALL, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, nut_length: 2.250 INCHES NOMINAL IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.785 INCHES MAXIMUM IN, nut_diameter: 1.550 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-908-4460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70065-3
NSN: 5340-00-908-4460
FSC: 5340
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
nut_length2.250 INCHES NOMINAL IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.785 INCHES MAXIMUM IN
nut_diameter1.550 INCHES NOMINAL IN
thread_class2B
overall_width1.100 INCHES NOMINAL IN
thread_length1.250 INCHES NOMINAL FIRST END IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
inclosure_typeENCASED
overall_height0.655 INCHES NOMINAL IN
NSN5340-00-908-4460
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70065-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION2915-00-908-2686 FUEL CONTROL,MA IN,TURBINE ENGINE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
7040-553Interchangeable
interchangeable cross-reference
interchangeable
7006-53Interchangeable
interchangeable cross-reference
interchangeable
DM54LS32J/883CInterchangeable
interchangeable cross-reference
interchangeable
980701-1Interchangeable
interchangeable cross-reference
interchangeable
5962PL1736971Interchangeable
interchangeable cross-reference
interchangeable
70051 ITEM NO 25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70065-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70065-3?
70065-3 is a OSCILLATOR,CRYSTAL CONTROLLED.
What parts can replace 70065-3?
There are 7 known substitutes for 70065-3: 7040-553, 7006-53, DM54LS32J/883C and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70065-3?
70065-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-908-4460. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70065-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026