PartsTable
Technical Data Sheet
PartsTable / MRO / 7006-5
7006-5 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

A courageous soldier from Ancient Greece, he has been training in the best army around since he was a seven, being taught retreat is never allowed. His spear is pulled back, pointing towards the enemy ready to throw. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-4822, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7006-5
NSN: 5330-00-006-4822
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC PHENOL FORMALDEHYDE (PMO) BODY
body_stylePLAIN BASE W/O BARRIERS
overall_width3.000 INCHES NOMINAL IN
base_thickness0.344 INCHES NOMINAL IN
inclosure_typeENCASED
overall_height0.655 INCHES NOMINAL IN
overall_length5.688 INCHES NOMINAL IN
connection_typeWIRE LEAD TERMINALS BOTTOM
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
voltage_in_volts250.0
basic_shape_styleRECTANGULAR OR SQUARE
precious_materialSILVER
NSN5330-00-006-4822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7006-5 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1002A6Interchangeable
interchangeable cross-reference
interchangeable
70065Interchangeable
interchangeable cross-reference
interchangeable
0271C0006-5Interchangeable
interchangeable cross-reference
interchangeable
26-13-5Interchangeable
interchangeable cross-reference
interchangeable
1380740Interchangeable
interchangeable cross-reference
interchangeable
G0088600Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7006-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7006-5?
7006-5 is a OSCILLATOR,CRYSTAL CONTROLLED manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7006-5?
There are 6 known substitutes for 7006-5: 1002A6, 70065, 0271C0006-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7006-5?
7006-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-4822. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7006-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026