PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7006-004
7006-004 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, outside_diameter: 5.004 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 4.999 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-470-9829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7006-004
NSN: 5330-01-470-9829
FSC: 5330
CAGE: 3N810 — PRECISE POWER CORPORATION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
outside_diameter5.004 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter4.999 INCHES NOMINAL IN
sealing_element_styleANGULAR
end_item_identificationNEXT GENERATION RADAR(NEXRAD)
accommodated_shaft_diameter3.500 INCHES NOMINAL IN
NSN5330-01-470-9829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7006-004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 5.004 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
END ITEM IDENTIFICATIONNEXT GENERATION RADAR(NEXRAD)
MATERIALRUBBER FLUOROCARBON CLASS FPM SEALING ELEMENT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
OUTSIDE DIAMETER5.004 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
HOUSING BORE DIAMETER4.999 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MIL-P-43116Interchangeable
interchangeable cross-reference
interchangeable
5120-00-116-6829Interchangeable
interchangeable cross-reference
interchangeable
EE34617Interchangeable
interchangeable cross-reference
interchangeable
35080Interchangeable
interchangeable cross-reference
interchangeable
670Interchangeable
interchangeable cross-reference
interchangeable
NAS907 TYFSZ3/16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7006-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7006-004?
7006-004 is a SEAL,PLAIN ENCASED.
What parts can replace 7006-004?
There are 10 known substitutes for 7006-004: MIL-P-43116, 5120-00-116-6829, EE34617 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7006-004?
7006-004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-470-9829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7006-004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026