PartsTable
Technical Data Sheet
Download PDF

7005610-1 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7005610-1: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 5.645 INCHES MINIMUM AND 5.665 INCHES MAXIMUM IN, material: STEEL COMP 316 OVERALL, thread_class: 2A LEFT EXTERNAL A, style_designator: PROJECTION BOTH ENDS, thread_direction: RIGHT-HAND LEFT EXTERNAL, nominal_thread_size: 0.250 INCHES LEFT EXTERNAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-491-2304, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7005610-1
NSN: 5340-01-491-2304
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
length5.645 INCHES MINIMUM AND 5.665 INCHES MAXIMUM IN
materialSTEEL COMP 316 OVERALL
thread_class2A LEFT EXTERNAL A
style_designatorPROJECTION BOTH ENDS
thread_directionRIGHT-HAND LEFT EXTERNAL
nominal_thread_size0.250 INCHES LEFT EXTERNAL IN
width_between_flats0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
cross-sectional_shapeROUND
flatted_portion_length0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
left_projection_length0.553 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
right_projection_length0.553 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
left_projection_diameter0.177 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
NSN5340-01-491-2304
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7005610-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 5.645 INCHES MINIMUM AND 5.665 INCHES MAXIMUM IN
•
LEFT PROJECTION DIAMETER: 0.177 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
LEFT PROJECTION LENGTH: 0.553 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: PROJECTION BOTH ENDS
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FLATTED PORTION LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND RIGHT EXTERNAL
TECHNICAL CHARACTERISTICS
LENGTH5.645 INCHES MINIMUM AND 5.665 INCHES MAXIMUM IN
LEFT PROJECTION DIAMETER0.177 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
LEFT PROJECTION LENGTH0.553 INCHES MINIMUM AND 0.572 INCHES MAXIMUM IN
STYLE DESIGNATORPROJECTION BOTH ENDS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A276 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FLATTED PORTION LENGTH0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND RIGHT EXTERNAL
THREAD DIRECTIONRIGHT-HAND LEFT EXTERNAL
NOMINAL THREAD SIZE0.250 INCHES RIGHT EXTERNAL IN
NOMINAL THREAD SIZE0.250 INCHES LEFT EXTERNAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7005610-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7005610-1?
7005610-1 is a STANDOFF,THREADED,SPACING.
What is the NSN for 7005610-1?
7005610-1 is cataloged in the U.S. Government catalog under NSN 5340-01-491-2304. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7005610-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.