PartsTable
Technical Data Sheet
Download PDF

7005436-1 — STUD,STEPPED

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

7005436-1: STUD,STEPPED.

The STUD,STEPPED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8735, thread_class: 3A NUT THREAD A, thread_length: 0.688 INCHES MINIMUM NUT THREAD IN, overall_length: 1.312 INCHES NOMINAL IN, shank_diameter: 0.250 INCHES NOMINAL IN, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5307-00-206-8964, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7005436-1
NSN: 5307-00-206-8964
FSC: 5307 — Studs
CAGE: 99974 — DELCO ELECTRONICS CORP DELCO SYSTEMS OPNS (USA)
SPECIFICATIONS
materialSTEEL COMP 8735
thread_class3A NUT THREAD A
thread_length0.688 INCHES MINIMUM NUT THREAD IN
overall_length1.312 INCHES NOMINAL IN
shank_diameter0.250 INCHES NOMINAL IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
style_designatorSTEPPED
thread_directionRIGHT-HAND STUD THREAD
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.250 INCHES NUT THREAD IN
thread_pitch_diameters+0.2809 TO 0.2824 INCHES STUD THREAD IN
thread_quantity_per_inch18 STUD THREAD
NSN5307-00-206-8964
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7005436-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM STUD THREAD IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: STEPPED
•
THREAD PITCH DIAMETERS: +0.2809 TO 0.2824 INCHES STUD THREAD IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM STUD THREAD IN
THREAD LENGTH0.688 INCHES MINIMUM NUT THREAD IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSTEPPED
THREAD PITCH DIAMETERS+0.2809 TO 0.2824 INCHES STUD THREAD IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6320 ASSN STD SINGLE MATERIAL RESPONSE
OVERALL LENGTH1.312 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND STUD THREAD
THREAD DIRECTIONRIGHT-HAND NUT THREAD
SUBSTITUTES & CROSS-REFERENCES 1
1110-119Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7005436-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7005436-1?
7005436-1 is a STUD,STEPPED.
What parts can replace 7005436-1?
There is 1 known substitute for 7005436-1: 1110-119. Substitute compatibility should be verified for your specific system.
What is the NSN for 7005436-1?
7005436-1 is cataloged in the U.S. Government catalog under NSN 5307-00-206-8964. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7005436-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.