PartsTable
Technical Data Sheet
Download PDF

7005184 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7005184: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-700-5184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7005184
NSN: 5310-00-700-5184
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
thread_seriesUN
special_featuresTHD RELIEF 2.562 IN. DIA BY 0.125 IN.D,UNTHD BORE 1.375 IN. DIA BY 0.250 IN. D IN
thread_directionLEFT-HAND
drive_point_depth0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
drive_point_width0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
nominal_thread_size2.500 INCHES IN
drive_point_quantity4
NSN5310-00-700-5184
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7005184 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
DRIVE POINT WIDTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
THREAD DIRECTION: LEFT-HAND
•
NOMINAL THREAD SIZE: 2.500 INCHES IN
•
NUT DIAMETER: 3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
DRIVE POINT WIDTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND
NOMINAL THREAD SIZE2.500 INCHES IN
NUT DIAMETER3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
NUT THICKNESS0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN
SPECIAL FEATURESTHD RELIEF 2.562 IN. DIA BY 0.125 IN.D,UNTHD BORE 1.375 IN. DIA BY 0.250 IN. D IN
DRIVE POINT QUANTITY4
NUT STYLEROUND
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
607644Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7005184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7005184?
7005184 is a NUT,PLAIN,ROUND.
What parts can replace 7005184?
There is 1 known substitute for 7005184: 607644. Substitute compatibility should be verified for your specific system.
What is the NSN for 7005184?
7005184 is cataloged in the U.S. Government catalog under NSN 5310-00-700-5184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7005184