PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70050
70050 ✓ Verified by PartsTable
schleich · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

With drawn sword, the Prince practices his strokes. Someday he will be King! Schleich's Prince will gain power for generations to come. Key specifications include height: 0.300 INCHES NOMINAL IN, diameter: 0.375 INCHES NOMINAL IN, material: STEEL CASE, case_style: SQUARE, head_style: ROUND, seal_width: 0.766 INCHES NOMINAL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4170, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70050
NSN: 5315-00-276-4170
FSC: 5315
CAGE: 31974 — HOFFMAN/NEW YORKER, INC. (USA)
SPECIFICATIONS
height0.300 INCHES NOMINAL IN
diameter0.375 INCHES NOMINAL IN
materialSTEEL CASE
case_styleSQUARE
head_styleROUND
seal_width0.766 INCHES NOMINAL IN
overall_width1.500 INCHES NOMINAL IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_head_diameter0.656 INCHES NOMINAL IN
under_head_length1.250 INCHES NOMINAL IN
NSN5315-00-276-4170
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 70050 · schleich ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 1.250 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 0.656 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
UNDER HEAD LENGTH1.250 INCHES NOMINAL IN
PIN HEAD DIAMETER0.656 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEROUND
MATERIALSTEEL OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
FIRST HOLE DIAMETER0.156 INCHES NOMINAL IN
HEIGHT0.300 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
413752C91Interchangeable
interchangeable cross-reference
interchangeable
70050Interchangeable
interchangeable cross-reference
interchangeable
0350-9410LUPInterchangeable
interchangeable cross-reference
interchangeable
DH37K-7Interchangeable
interchangeable cross-reference
interchangeable
415084SSRInterchangeable
interchangeable cross-reference
interchangeable
PLUMBERSR0LLInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70050?
70050 is a RETAINER,GUN COMPONENT manufactured by schleich.
What parts can replace 70050?
There are 13 known substitutes for 70050: 413752C91, 70050, 0350-9410LUP and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70050?
70050 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70050

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026