7004-N — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

7004-N: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN, center_hole_diameter: 1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-008-1155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7004-N

NSN: 5331-01-008-1155
FSC: 5331 — O-ring
CAGE: 23724 — RUTHMAN PUMP AND ENGINEERING INC DBA FULFLO SPECIALTIES CO DIV FULFLO SPECIALTIES CO. (USA)

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR
temp_rating	-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
center_hole_diameter	1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-01-008-1155

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN

•

MATERIAL: RUBBER CHLOROPRENE CLASS CR

TECHNICAL CHARACTERISTICS

TEMP RATING	-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN
MATERIAL	RUBBER CHLOROPRENE CLASS CR

SUBSTITUTES & CROSS-REFERENCES 7

ARP568-129C557Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-129C557-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

4129-53Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ARP568-129C557- 7Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

V-2122 P/N 7004-NReference document

Same NSN cross-reference

Reference document — Secondary reference

7041NReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7004-N?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7004-N?

7004-N is a O-RING.

What parts can replace 7004-N?

There are 7 known substitutes for 7004-N: ARP568-129C557, 2-129C557-70, 4129-53 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 7004-N?

7004-N is cataloged in the U.S. Government catalog under NSN 5331-01-008-1155. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7004-N — O-RING

Request a Quote — 7004-N