PartsTable
Technical Data Sheet
Download PDF

70034-44 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

70034-44: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1050 OVERALL, hole_diameter: 0.512 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN, outside_diameter: 0.867 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM AND CHROMATE OVERALL, material_thickness: 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-194-1483, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70034-44
NSN: 5310-00-194-1483
FSC: 5310 — Nuts and Washers
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OVERALL
hole_diameter0.512 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
outside_diameter0.867 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-194-1483
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 70034-44 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.867 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1050 OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.867 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
MATERIAL THICKNESS0.037 INCHES MINIMUM AND 0.045 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIALSTEEL COMP 1050 OVERALL
HOLE DIAMETER0.512 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
MS35333-44Reference document
Same NSN cross-reference
Reference document — NATO reproduction reference
5310PL0656419Reference document
Same NSN cross-reference
Reference document — Informative reference only
803-4384536-8XXX-26Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
120113-9Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1224Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN936A816Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 70034-44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70034-44?
70034-44 is a WASHER,LOCK.
What parts can replace 70034-44?
There are 8 known substitutes for 70034-44: MS35333-44, 5310PL0656419, 803-4384536-8XXX-26 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70034-44?
70034-44 is cataloged in the U.S. Government catalog under NSN 5310-00-194-1483. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70034-44

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.