PartsTable
Technical Data Sheet
7003-51 ✓ Verified by PartsTable
Intellinet · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Easily add a hard disk drive to your network environment, providing shared files and storage for all the users on your network.<br><br>The INTELLINET NETWORK SOLUTIONS NAS Enclosure provides a flexible, simple and yet affordable approach to network attached storage. It’s flexible because you can use it as NAS or as external storage (for a single computer). It’s simple because the auto-configuration function executes as soon as you connect the device to the network, eliminating complex settings or program installation.

And it is affordable, yet still includes valuable features such as FTP and DHCP support.<br><br><b>Network Attached Storage</b><br>The NAS Enclosure provides a quick and cost-effective solution to sharing storage on the network. Simply install a hard disk drive into the enclosure, and now you and your end-users can share the files as if they were stored on their own computers. This is ideal for sharing music, photos, legal documents and any other information that would be This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8959, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 7003-51
NSN: 3110-00-144-8959
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
colorGREEN
length54.000 INCHES NOMINAL IN
end_typeUNARMED
materialPOLYGLYCOLIC ACID SUTURE
sterilitySTERILE
body_width1.375 INCHES NOMINAL IN
body_length4.375 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeUNINCLOSED
terminal_width0.188 INCHES NOMINAL IN
size_designator2-0
terminal_length0.462 INCHES NOMINAL IN
NSN3110-00-144-8959
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7003-51 · Intellinet ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
72-6970-322Interchangeable
interchangeable cross-reference
interchangeable
271963Interchangeable
interchangeable cross-reference
interchangeable
804Interchangeable
interchangeable cross-reference
interchangeable
3322Interchangeable
interchangeable cross-reference
interchangeable
31322TYPEDInterchangeable
interchangeable cross-reference
interchangeable
SA284SPN11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7003-51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7003-51?
7003-51 is a RESISTOR,FIXED,WIRE WOUND,INDUCT manufactured by Intellinet. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7003-51?
There are 26 known substitutes for 7003-51: 72-6970-322, 271963, 804 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7003-51?
7003-51 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8959. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7003-51