PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 700190
700190 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The TRANSFORMER,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, bore_shape: STRAIGHT, design_form: ANGULAR SHAPED, groove_width: 0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN, bore_diameter: 1.3750 INCHES MINIMUM AND 1.3830 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-6105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700190
NSN: 3110-00-157-6105
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
bore_shapeSTRAIGHT
design_formANGULAR SHAPED
groove_width0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
bore_diameter1.3750 INCHES MINIMUM AND 1.3830 INCHES MAXIMUM IN
contact_angle25.0 DEGREES NOMINAL
load_directionANGULAR
overall_length1.8750 INCHES NOMINAL IN
surface_finishGROUND
groove_diameter1.6200 INCHES MINIMUM AND 1.6230 INCHES MAXIMUM IN
effective_length1.2500 INCHES NOMINAL IN
special_featuresBITE SIZE: 2MM; 40 DEG UP ANGLE; 6 IN. SHAFT LENGTH (152MM) MM
NSN3110-00-157-6105
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700190 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROOVE WIDTH: 0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
•
GROOVE DIAMETER: 1.6200 INCHES MINIMUM AND 1.6230 INCHES MAXIMUM IN
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
•
LUBRICATION MATERIAL: GREASE
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
GROOVE WIDTH0.5100 INCHES MINIMUM AND 0.5150 INCHES MAXIMUM IN
GROOVE DIAMETER1.6200 INCHES MINIMUM AND 1.6230 INCHES MAXIMUM IN
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE
LUBRICATION MATERIALGREASE
SURFACE FINISHGROUND
LOAD DIRECTIONANGULAR
CONTACT ANGLE25.0 DEGREES NOMINAL
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
4P94519-101AInterchangeable
interchangeable cross-reference
interchangeable
6538Interchangeable
interchangeable cross-reference
interchangeable
E1433Interchangeable
interchangeable cross-reference
interchangeable
51860-1Interchangeable
interchangeable cross-reference
interchangeable
7000-X2174Interchangeable
interchangeable cross-reference
interchangeable
209-062-761-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700190?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700190?
700190 is a TRANSFORMER,RADIO FREQUENCY.
What parts can replace 700190?
There are 30 known substitutes for 700190: 4P94519-101A, 6538, E1433 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700190?
700190 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-6105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700190

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026