PartsTable
Technical Data Sheet
Download PDF

70013-8 — 70013-8

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

70013-8: 70013-8.

The 70013-8 is a the manufacturer industrial component. Key specifications include document_type: INDUSTRIAL DRAWING, document_source: 76301, document_identification: ST5M1488-3S, component_document_origin: INDUSTRIAL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-054-9263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 70013-8
NSN: 5305-00-054-9263
NIINs: 000549263, 002500224, 007272165, 008762306, 010786830, 012960239
FSC: 5305 — Screws
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
document_typeINDUSTRIAL DRAWING
document_source76301
component_quantity4
document_identificationST5M1488-3S
component_document_originINDUSTRIAL
component_document_page_number1
NSN5305-00-054-9263
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70013-8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.178 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
•
THREAD LENGTH: 1.500 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: SQUARE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.178 INCHES MINIMUM AND 0.196 INCHES MAXIMUM IN
FASTENER LENGTH1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD LENGTH1.500 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
POINT STYLECUP
SUBSTITUTES & CROSS-REFERENCES 2
FFS210Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS51955-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 70013-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70013-8?
70013-8 is a 70013-8. It is classified as a MRO (MRO_GENERAL).
What parts can replace 70013-8?
There are 2 known substitutes for 70013-8: FFS210, MS51955-8. Substitute compatibility should be verified for your specific system.
What is the NSN for 70013-8?
70013-8 is cataloged in the U.S. Government catalog under NSN 5305-00-054-9263. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70013-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.