PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70012-44
70012-44 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STUD,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL, thread_class: 2A NUT THREAD A, thread_length: 0.592 INCHES MINIMUM AND 0.612 INCHES MAXIMUM NUT THREAD IN, overall_length: 1.405 INCHES MINIMUM AND 1.425 INCHES MAXIMUM IN, hardness_rating: 26.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM, thread_direction: RIGHT-HAND NUT THREAD. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-582-5965, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70012-44
NSN: 5310-00-582-5965
FSC: 5310
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialSTEEL
thread_class2A NUT THREAD A
thread_length0.592 INCHES MINIMUM AND 0.612 INCHES MAXIMUM NUT THREAD IN
overall_length1.405 INCHES MINIMUM AND 1.425 INCHES MAXIMUM IN
hardness_rating26.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND NUT THREAD
surface_treatmentPHOSPHATE OVERALL
nominal_thread_size0.312 INCHES NUT THREAD IN
thread_quantity_per_inch18 STUD THREAD
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) STUD THREAD
NSN5310-00-582-5965
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 70012-44 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 36
30X562Interchangeable
interchangeable cross-reference
interchangeable
12X199Interchangeable
interchangeable cross-reference
interchangeable
3064686Interchangeable
interchangeable cross-reference
interchangeable
T1913Interchangeable
interchangeable cross-reference
interchangeable
42-6880-100-150Interchangeable
interchangeable cross-reference
interchangeable
K2412Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70012-44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70012-44?
70012-44 is a STUD,PLAIN.
What parts can replace 70012-44?
There are 36 known substitutes for 70012-44: 30X562, 12X199, 3064686 and 33 more. Substitute compatibility should be verified for your specific system.
Is 70012-44 still available?
70012-44 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70012-44

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026