PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 700117
700117 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include valve_operation_method: MANUAL, operating_pressure_and_type: 2500.0 POUNDS PER SQUARE INCH (PSI) LIQUID MAXIMUM REQUIRED LBS, criticality_code_justification: FEAT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8992, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700117
NSN: 3110-00-144-8992
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
valve_quantity4
special_features15GPM-4 MANUAL DIRECT MOUNTED CONTROL LEVERS FOR SLEW,HOIST,JIB AND LUFF;3 POSITION 4 WAY,SPRING RETURN TO NEUTRAL FOR ALL FUNCTIONS;MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTERFABRICATION
valve_operation_methodMANUAL
operating_pressure_and_type2500.0 POUNDS PER SQUARE INCH (PSI) LIQUID MAXIMUM REQUIRED LBS
criticality_code_justificationFEAT
NSN3110-00-144-8992
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700117 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL SHIELD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 12.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIALSTEEL SHIELD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
SHIELD QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
SEC857GInterchangeable
interchangeable cross-reference
interchangeable
B6259Interchangeable
interchangeable cross-reference
interchangeable
37161Interchangeable
interchangeable cross-reference
interchangeable
6201RSInterchangeable
interchangeable cross-reference
interchangeable
302-1016P8Interchangeable
interchangeable cross-reference
interchangeable
SKA1621Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700117?
700117 is a BEARING,BALL,ANNULAR.
What parts can replace 700117?
There are 31 known substitutes for 700117: SEC857G, B6259, 37161 and 28 more. Substitute compatibility should be verified for your specific system.
Is 700117 still available?
700117 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026